• Laser Cutting

On-Demand Laser Cutting

We offer laser cutting services using our state-of-the-art, L3 Salvagnini 4KW Fiber Laser machine. Supported sheet metal and plate thicknesses range from 0.005″ to .75″, and we stock a variety of grades/alloys of steel, stainless steel, and aluminum.  We can also work on Copper and Brass!

Visions into Reality

Whether you are a small business owner working from your garage or a manufacturer requiring 100,000 parts per week, we transform your designs into reality. We offer fast, affordable, and precise laser cutting services utilizing industrial-grade laser cutting technology.

Capabilities

Steel

  • A1008 Cold Rolled
  • A36 Hot-Rolled, and Hot-Roll Pickled & Oiled
  • A572 G50
  • G90 Galvanized, and Electrogalvanized Steel
  • AR500
  • 1095 Spring Steel (hardened and annealed)
  • 1075 Spring Steel (annealed)
  • 4130 Steel (annealed)
  • 4140 Steel (hardened, precision-ground)
  • O1 and D2 Tool Steel

Stainless Steel

  • 304, #4, #2B, and #1 finish
  • 316, #2B finish, and #1 finish
  • 430, #4 finish

Aluminum

  • 5052 H32, formable aluminum
  • 6061 T6
  • 1100, pure
  • 7075 T6

Our standard tolerances are +/- 0.005 inches.

Be aware that heating during the cutting process can cause your part to expand, and it may shrink as it cools. This effect is influenced by the material, cut density, and the part’s aspect ratio (length over width). In particular, long narrow aluminum parts may end up smaller than expected due to these thermal effects.

Model L3-40
XY working range (inch) 120 x 60
Z axis stroke (mm) 100
Maximum XY speed (ft/min) 510
Position accuracy Pa 0.08
Average position range Ps 0.03
Fiber sources 4000W
Steel 20
Stainless steel 15
Aluminum 15
Copper 8
Brass 8
Minimum thickness (mm)  15
Maximum electricity consumption (in kW)3 21
Average electricity consumption4 13

1 Measurement calculated according to VDI3441 on maximum axis lengths.
2 Cutting quality on limit thicknesses may depend on geometries required, material quality and system operating conditions. At limit values, burrs may be present on the lower edge of the cut. These values are for the Salvagnini reference materials.
3 Maximum consumption calculated on a system with standard configuration when cutting 3 reference sheets of mild steel with a thickness of 0.8-6 mm.
4 Average consumption calculated on a system with standard configuration when cutting 3 reference sheets of mild steel with a thickness of 0.8-6 mm.
5 High efficiency version.

Upload Part